Search
19 August 2019 ..:: Home ::.. Register   Login
Basket is empty
 Testimonials Minimize

They arrived this morning and used this afternoon. Thanks again
Great service
-L Goodall
UK
This is the best service I have ever received

I ordered a replacement jar for my KitchenAid Blender at 4.00 on Monday and received it at 8.00 am on the Tuesday just in time for my morning smoothie.

Well done K A Parts - Congratulations.


-Sadie Tearle
East Sussex

  

ipv6 ready

 Store Front Minimize
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge

KitchenAid Blender Coupler + WS Fitting Tool 9704230_1plusWS for KitchenAid Blenders

This product is IN STOCK!

Price: £11.69

 

 

Genuine KitchenAid replacement part for Kitchen Aid blenders and a spanner that will make its removal easier. The rubber coupler is made by Whirlpool in the US for Kitchenaid. This clutch/coupler will fit all KSB3, KSB5 and 5KSB5 models. 

The rubber coupler is designed to break if the blender is under strain.

This will often happen if the food being chopped is too hard or being chopped at too higher speed. The part failing prevents the motor from more severe damage.The coupler/clutch has six rubber teeth which grip the underside of the blade in the blendering jug. The clutch is secured to the blender spindle (which is made of steel) with a reverse aluminum thread. i.e. you turn clockwise to undo it which is the opposite to normal.

There are two ways to remove the old clutch. First you can use the thin spanner to grip the flats on the spindle under the coupler then turn the coupler clockwise. Second you can use a large flat bladed screwdriver to gently prise the coupler off the spindle. If you use the second method the aluminium thread in the coupler will be stripped as aluminum is softer. This is not a problem as the coupler will need replacing anyway. Just make sure you clean off any pieces of aluminum left in the thread on the spindle.

The rubber coupler comes sealed in an original bag with instruction on removing the old coupler with a screwdriver.  To make life easier, a special spanner/wrench is included.
This spanner/wrench is small enough to slide under the KitchenAid rubber coupler/clutch and allow the coupler to be twisted off (don't forget, it is clockwise to undo it which is the opposite to normal!).  Used carefully, you should be able to avoid the scratches that often occur when you use a screwdriver to remove the coupler.

The special tool has been designed to easily slide under the old coupler and by twisting the coupler a little it will lock into position.  Now turn the coupler clockwise (the opposite way to which you would normally undo a screw or jar lid).  Normally the coupler will undo with only a small amount of force, however couplers that have been in place a long time or may have had some excessive load may have been tightened onto the spindle. Please use adjustable pliers or similar tool to grip the coupler if it is wound on too tight.   In really difficult cases it is necessary to use a large screwdriver to prise the old coupler off.

For more instructions please see: how to remove the old coupler.

 

 

The following part is available seperately

The following is the same product packaged differently

  • Two (2) KitchenAid Blender Rubber Couplers (9704230) + WS Fitting Tool 9704230_2plusWS

The following part is functionally similar

  • KitchenAid Blender rubber coupler (black rubber) 9704230 with support from K A Parts

Please email us or contact us if you would like to confirm whether this part will fit your machine.

  • EAN: 5060268120082
  • MPN: 9704230_1plusWS
  • Produced by: K A Parts Limited
  • Brand: KA PARTS

 

Postage as low as £3.49

We charge for postage and packing based on the weight of the items in your basket. If this is the only item in your basket and you want delivery to an address in the UK the shipping should be no more than £3.49.

Other shipping options

Shipping serviceCost
UK mainland standard (Royal Mail and courier) £3.49
Europe (including Ireland) £4.99
International delivery outside Europe £6.99
UK courier (incl Royal Mail special delivery) £8.99
International signed for / Airsure Europe £9.99
International signed for / Airsure outside Europe £11.99
UK 24 hour (sent same day if ordered before 10am) £19.99

Genuine replacement coupler for a Kitchenaid KSB5 / KSB52 blender with a KAParts spanner tool to help with the removal of your old coupler.

  • Genuine KitchenAid 9704230 coupler and a specially designed hardened steel tool to help remove the old coupler.
  • Designed for model numbers starting with 5KSB5B, 5KSB5E, 5KSB52B, 5KSB52E and more in this range. It will not fit the 5KSB555 or 5KSB560 series.
  • Backed by technical support from K A Parts Limited. K A Parts will be happy to assist with confirming the correct part. The most effective way is to send photographs of the failed part. If you no longer have the part, please send photos of what you do have or where the part should go.
  • Will fit: KSB3-4 KSB5-4 5KSB5-4 KSB5SS-4 5KSB52-4 5KSB52EOB5 5KSB52ECR5 5KSB52ENK5 5KSB52EBU5 5KSB52EGR5 5KSB52EWH5 5KSB52EER5 5KSB52EMY5 5KSB52EAC5 5KSB52EPM5 5KSB52ECV5 5KSB52ETG5 5KSB52ABU4 5KSB52APK4 5KSB52AWH4 5KSB52AOB4 5KSB52AMY4 5KSB52ANK4 5KSB52AAC4 5KSB52AMC4 5KSB52ACR4 5KSB52ATG4 5KSB52AER4 5KSB52AGR4 5KSB52SWH4 5KSB52SGR4 5KSB52SER4 5KSB52SOB4 5KSB52SBU4 5KSB52SWH5 5KSB52SGR5 5KSB52SBU5 5KSB52SOB5 5KSB52SER5 5KSB52EBU4 5KSB52EAC4 5KSB52EOB4 5KSB52EGR4 5KSB52ENK4 5KSB52EMY4
  • Will fit: 5KSB52ECR4 5KSB52ETG4 5KSB52EER4 5KSB52EWH4 KSB3 5KSB52BBU5 5KSB52BPM5 5KSB52BMY5 5KSB52BNK5 5KSB52BER5 5KSB52BAC5 5KSB52BWH5 5KSB52BOB5 5KSB52BGR5 5KSB52BOB4 5KSB52BGR4 5KSB52BWH4 5KSB52BAC4 5KSB52BNK4 5KSB52BBU4 5KSB52BER4 5KSB52BMY4 KSB5BU4 KSB5BK4 KSB5ER4 KSB5AC4 KSB5TG4 KSB5GN4 KSB5NK4 KSB5MY4 KSB5GR4 KSB5MC4 KSB5CP4 KSB5WW4 KSB5OB4 KSB5CR4 KSB5WH4 4KSB5MY4 4KSB5BK4 4KSB5PK4 4KSB5ER4 4KSB5OB4 4KSB5GN4 4KSB5CR4 4KSB5MC4 4KSB5TG4 4KSB5BU4 4KSB5WH4 4KSB5WW4 KSB5SSMW4
  • Will fit: KSB5SSOB4 KSB5SSBK4 KSB5SSWH4 4KSB5SSOB4 KSB5SSMW3 (White) (Onyx Black) (Empire Red) (Cobalt Blue) (Almond Creme (Imperial Grey) (Brushed Nickel) (Majestic Yellow) (Chrome) (Green) (Tangerine) (Satin Copper) (Metallic) KSB5PK4 (Pink) (on) (Pearl) (Caviar) 5KSB5 5KSB3BWH3 5KSB3EWH3 5KSB52SWH WHITE 5KSB5BAC CRME 5KSB5BBU COBALTBLUE 5KSB5BCR CHROME 5KSB5BER IMPERIALRED 5KSB5BGN KITCHENAID 5KSB5BGR MATTGREY 5KSB5BGR2 5KSB5BGR3 5KSB5BGR4 5KSB5BMY MAJESTICYELLOW 5KSB5BNK NICKEL
  • Will fit: 5KSB5BNK4 5KSB5BWH 5KSB5EAC CREAM 5KSB5EBU 5KSB5ECR 5KSB5EER 5KSB5EGR 5KSB5EMY 5KSB5ENK 5KSB5EWH 5KSB5SBU 5KSB5SCR 5KSB5SER 5KSB5SGR 5KSB5SNK 5KSB5SSBOB ONYXBLACK 5KSB5SSSEOB 5KSB5SWH (

This kit will help you unscrew the old coupler with the aid of the supplied spanner and a tea towel. This works quickly and easily over 95% of the time. If it does not work we have a number of other methods which depend on what tools you have available.

The rubber coupler is made by Whirlpool in the US for Kitchenaid.

This clutch/coupler will fit all models that start with the model number 5KSB3, KSB3, KSB5, 5KSB52 and 5KSB5 models unless it starts KSB555.

The rubber coupler is designed to break if the blender is under strain. This will often happen if the food being chopped is too hard or being chopped at too higher speed. The part failing prevents the motor from more severe damage.The coupler/clutch has six rubber teeth which grip the underside of the blade in the blender jug. The clutch is secured to the blender spindle (which is made of steel) with a reverse aluminium thread. i.e. you turn clockwise to undo it which is the opposite to normal. Use the thin spanner to grip the flats on the spindle under the coupler then turn the coupler clockwise. 

Used carefully, you should be able to avoid the scratches that often occur when you use a screwdriver to remove the coupler. To use the spanner, place it under the coupler. There is a shaft under the coupler and the aim is to engage the shaft with the slot in the spanner. You should be able to 'feel' the shaft and my turning the spanner or coupler you should be able to feel the spanner fully engage. Once engaged, the spanner should be held still whilst the coupler is twisted off (clockwise - this is the opposite to normal). 

Price: £11.69 33 in stock
Back to product list

  
 New KitchenAid Minimize


  

 

 

Copyright 2009-2019 by K A Parts Limited, registered in the UK 7047084   Terms Of Use  Privacy Statement
DotNetNuke® is copyright 2002-2019 by DotNetNuke Corporation